Results 1 to 5 of 5

Thread: recent sign

Hybrid View

  1. #1
    Join Date
    Jan 2004
    Location
    Norman, Ok
    Posts
    3,251

    Default

    Yep, I know what you mean. I'd say about thirty percent of my work comes from regular clients. For me there's another big advantage to this craft which is seeing what you've done while driving around the community. That's a major reason to build them to last. That attention goes into every step along the way.

    O, by the way, I have a commission for a redwood replacement sign due to a auto crash. My regular redwood supply no longer has tight grained vertical lumber. It's all open grained. Meaning there's lots of latter wood to deal with. That's no problem with a CNC since the depth can be rendered with the sandblast mask applied to the surface. Then a very light blast will bring out the beauty in the wood. I've found a gentle blast with very fine media works best. Heavy sand like 20-50 fine looks too crude.

    Joe

  2. #2
    Join Date
    Jan 2011
    Location
    gleason, wi 54435
    Posts
    449

    Default

    Build them to last indeed. My first dozen or so signs were made with spar varnish. Every sign that was exposed to even minimal sunshine peeled within a year or so. I replaced every single one and almost quit making signs before finding better coatings. Good job with getting the redwood sign order. Despite all of its faults, wood is still my favorite material.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •