Lattice Drill Jig

[tysmall]

Hello to all,i am need of some help again,so far was able to do a few drawings without any assistance,however now the company has being asked to build lattice for some doors.I have attempted to do the layout and do a drill tool-path to test on 12" by 12" sheet to may sure all is well before,i drill the holes in 4' by 8' sheet and it's wrong.So far my first 2 attempts aren't great,however my 3rd is better,yet it still seems off.I have attached the drawing and tool-path for a review,thanks.

[tysmall]

Ok I think i got it sorted out now,will do a run and posted back in a few.

[tysmall]

Ok i realized that i didn't off set to the correct distance as well setting the correct angle of 60 degree.