Results 1 to 6 of 6

Thread: Bistro table

  1. #1
    Join Date
    Sep 2006
    Location
    Garland Tx
    Posts
    2,024

    Default Bistro table

    My customer asked for a “Bistro table” and chairs for a small apartment… whatever that is! Bistro table that is. That’s all the parameters I was given… Oh, and it needed to be white.

    This is what I made…
    Its’s made from 12mm Baltic birch. The compound angle of the stool legs calculated to 44.472°, I figured that was awful close to 45° so I cut that vector with a 90° V-bit. The table pedestal legs are two layers thick, they meet at 120° each so I cut the mating vector of each laver with a 60° V-bit. The table apron was kerf cut on the bot 3/8” deep every 5/8” to allow the radius.

    I was very pleased with how well this version 1 set came together! So was the client… I think. With a pleased look on his face he said “ you pulled this design right out of your butt!” Is that how a millennial says “Neat!” or “groovy”?

    SG
    Attached Images Attached Images

  2. #2
    Join Date
    Mar 2006
    Posts
    7,756

    Default

    Don't forget what i think is the best descriptor for this design........"FAR OUT, MAN!" very cool Steve.
    Words of Wisdom:
    “Words that sink into your ears are whispered…… not yelled”
    “The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
    “The only difference between a rut and a grave is the depth”
    -----------
    Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
    -----------
    The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson

  3. #3
    Join Date
    Jan 2004
    Location
    Jasper, TX
    Posts
    436

    Default

    Looks "Cool" to me.

  4. #4
    Join Date
    Jan 2008
    Location
    Hobby-Tronics, Chiloquin Oregon
    Posts
    1,133

    Default

    I would certainly put that set in the 'artsy' category, well done. Russ
    AKA: The Train Guy

  5. #5
    Join Date
    Jun 2001
    Location
    Austin, TX
    Posts
    362

    Default

    That looks great Steve. You always seem to turn any project into an "interesting project"..

  6. #6
    Join Date
    Mar 2011
    Location
    New Bern, NC
    Posts
    287

    Default

    Groovy, Daddy...joe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •