Results 1 to 6 of 6

Thread: Online Training Wednesday May 24th, 2017 - CNC Signs

  1. #1
    Join Date
    Sep 2012
    Posts
    281

    Default Online Training Wednesday May 24th, 2017 - CNC Signs

    Hello everyone,

    Please join ShopBot Tools this Wednesday May 24th, 2017 for a free online training. The topic this week is “CNC signs.” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.

    Using a ShopBot and the Vectric software this training will demonstrate how to successfully create different types of signs. We will create signs with 3D clipart, raised letters, textured backgrounds and several other methods that Shopbotters use to create signs.

    There is no need to sign up, just show up a few minutes early on Wednesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.

    If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
    Thanks and hope to see you there. Thanks, TJ

    CNC Signs
    Wed, May 24, 2017 1:00 PM - 3:00 PM EDT
    Please join my meeting from your computer, tablet or smartphone.
    https://global.gotomeeting.com/join/740943717

    You can also dial in using your phone.
    United States: +1 (646) 749-3122
    Access Code: 740-943-717
    First GoToMeeting? Try a test session: https://care.citrixonline.com/g2m/getready

  2. #2
    Join Date
    Feb 2010
    Location
    SOUTH CENTRAL COLORADO
    Posts
    1,155

    Default

    I am old and reserve the right to be forgetful, but that is something that i definitely want to tune in for.

  3. #3
    Join Date
    Feb 2011
    Location
    Melbourne, Australia
    Posts
    545

    Default

    Same but I'll wait for the video when it gets released as I'm other side of the world!
    Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
    2.2Hp universal 4 zone Vac Table

  4. #4
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    Bumping
    Sounds like a good subject TJ !
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

  5. #5
    Join Date
    Sep 2012
    Posts
    281

    Default

    Thanks everyone for a great turnout and great discussion following the training. Here is the video from today's training: https://youtu.be/TGraONBr9WY

  6. #6
    Join Date
    Oct 2009
    Location
    Elgin Illinois
    Posts
    706

    Default

    Thanks TJ for the good presentation which I just got done watching......... Chuck
    Chuck Keysor (circa 1956)
    PRT Alpha 60" x 144" (circa 2004)
    Columbo 5HP spindle
    Aspire 9.0, Rhino 5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •