Got a new control board off the forms but now my x-2 port is fine all other ports wont work any help would be appreciated
control board is v3.54
Motor on x-2
https://youtu.be/SdGD9eFYnFg
Motor on any other port
https://youtu.be/jSNdmbQYR78
Got a new control board off the forms but now my x-2 port is fine all other ports wont work any help would be appreciated
control board is v3.54
Motor on x-2
https://youtu.be/SdGD9eFYnFg
Motor on any other port
https://youtu.be/jSNdmbQYR78
Try the other motors on the working drive to verify the drive(s) are bad.
Gary Campbell
GCnC Control
GCnC411(at)gmail(dot)com
Servo Controller Upgrades
http://www.youtube.com/user/Islaww1
"We can not solve our problems with the same level of thinking that created them"
— Albert Einstein
all the motors work fine on the x-2 drive
could it be a thing that all the drives on the new board are bad besides the one
If the power supply has proper voltage and all motors work as expected on one drive, then yes, it appears the rest are bad
Gary Campbell
GCnC Control
GCnC411(at)gmail(dot)com
Servo Controller Upgrades
http://www.youtube.com/user/Islaww1
"We can not solve our problems with the same level of thinking that created them"
— Albert Einstein