Brian...IF your talking about Scott Worden's Walnut Slab work....look here;
http://www.talkshopbot.com/forum/sho...47-Walnut-Slab

I looked for the thread that had a link to his other slab work pictures, but didn't look hard enough apparently

IF talking about my wet Sugar Maple round...Pure S*** Luck.....SHOULD have taken a flat on pic...entered it in my App Data-Wood folder...and sizing would have been better on this Proto....
REALLY considered Aspire after that cut( AND the Oak Burl "Bowl" that Phill5 in UK was kind enough to make me an .stl as Fluting Toolpath get's Funky when Radial Arraying, and THEN trimming funky vectors!!)

LOVING Scott's slab work....also Check out Steve Glassel's beautiful slab stashes!!

IF for not cutting "Firewood" for thicker small pieces for my Tiny stuff, I'd be trimming sections off my long slabs( NOT HAPPENING!), and going to a hardwood dealer and saying;
"I'll take one foot of this 12/4X16' slab. and 2' off this 10/4X12' "......AND PROMPTLY get kicked out of the shop!!!