Custom Dust Shoe Size?

[rb99]

I think I am going to have to make my own dust shoe to allow the foot and hose to fit between the two Y rails on my old SB. I want the foot to be adjustable but fixed as opposed to being attached to the router.

Is there any advantages to having the dust foot larger or smaller?

Where can I get the rare earth magnets and the flexible brush material?

Any tips on the mounting, hose, the up down and locking mechanism etc?

[steve_g]

https://www.kjmagnetics.com/
http://www.brush.com/type/tstrip.html
https://www.gordonbrush.com/strip_brushes.php

[rb99]

https://www.kjmagnetics.com/
http://www.brush.com/type/tstrip.html
https://www.gordonbrush.com/strip_brushes.php

Thanks. I found this one from an old thread.
https://www.sealeze.com/products/xtraseal-strip-brush

[rb99]

Anyone know which one is like the Kent brush? I read he doubles up on the strip. Is that correct? (note I own a Kent shoe but I need to make a custom one now.)

[knight_toolworks]

I can give you the plans my new design. though it is mounted on my new prs Z but you can adapt it. you need to stick to 3" hose 4" just gets in the way. he uses a single brush and you can buy them from him myself I like the horsehair ones.

[rb99]

I can give you the plans my new design. though it is mounted on my new prs Z but you can adapt it. you need to stick to 3" hose 4" just gets in the way. he uses a single brush and you can buy them from him myself I like the horsehair ones.

yes please. If you want to email it to me, rib9080 (at) gmail (dot) com

[knight_toolworks]

yes please. If you want to email it to me, rib9080 (at) gmail (dot) com

Ok here are the pics

[rb99]

Thanks for the pics. Hold off on the files for now, I will have to see if there is enough room on my machine for this. Looks great. Is there any disadvantage to having it attached at the back of the Z like that?

[knight_toolworks]

Thanks for the pics. Hold off on the files for now, I will have to see if there is enough room on my machine for this. Looks great. Is there any disadvantage to having it attached at the back of the Z like that?

it should fit it may need to be shortened by 1/2" Had a little extra room when I went with the new z. give me the measurement from the spindle to the bar. the 3: hose is what makes it work. it is better being attached Icahn change the height it makes w world of difference on how it works so much better.

[phil_o]

I made a dust shoe similar to this. https://www.youtube.com/watch?v=ufXTIu2VmME&t=658s
A similar design https://www.youtube.com/watch?v=ufXT...t.com/purchase

Phil