Hey all, I'm working on making a custom vacuum fixture for a repeating HDPE job I cut all the time. Right now I use the universal vac/bleeder boared setup and I just onion skin everything. It works, but if I can through cut all the HDPE I can save a bunch of hand work.
I'm going to make some vacuum fixtures just like this:
https://store.shopbottools.com/produ...ant=6937750785
I get how they work, but the only thing I'm not totally clear on is how that little vacuum hose is actually fixtured into the HDPE board...
Are you folks using some kind of threaded screw in fitting for that little hose, or something like a Shark Bite adapter? I can't seem to find any images or drawings online... Any help would be appreciated!