Results 1 to 3 of 3

Thread: Online Training - Wednesday July 19th, 2017 - Tabbing Parts

  1. #1
    Join Date
    Sep 2012
    Posts
    226

    Default Online Training - Wednesday July 19th, 2017 - Tabbing Parts

    Hello everyone,
    Please join ShopBot Tools this Wednesday July 19th, 2017 for a free online training. The topic this week is “Tabbing Parts.” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.

    Using a ShopBot and the Vectric software this training will help users with tabbing parts. Tabs are also known as bridges and they are used to hold a part to the scrap piece when other methods of hold down are not available. We will look at how to add tabs to your parts, amounts, locations, tab sizes for different types of materials and cleaning up a tab after the cut is complete.

    There is no need to sign up, just show up a few minutes early on Wednesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.

    If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.

    Thanks and hope to see you there. Thanks, TJ


    Tabbing Parts
    Wed, Jul 19, 2017 1:00 PM - 3:00 PM EDT

    Please join my meeting from your computer, tablet or smartphone.
    https://global.gotomeeting.com/join/203565069

    You can also dial in using your phone.
    United States: +1 (646) 749-3122

    Access Code: 203-565-069

    Joining from a video-conferencing room or system?
    Dial: 67.217.95.2##203565069
    Cisco devices: 203565069@67.217.95.2

    First GoToMeeting? Try a test session: https://care.citrixonline.com/g2m/getready

  2. #2
    Join Date
    Sep 2012
    Posts
    226

    Default

    Thank you everyone today for your participation. A lot of new faces today! Enjoy! https://youtu.be/TCME1u9UPCg

  3. #3
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    3,776

    Default

    Good vid TJ, But you totally spaced mentioning friction tabs(Like I spaced on class today).
    I'll have to avoid playing hooky
    scott
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •