Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Help!!

  1. #11
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    3,919

    Default

    David,
    We bought our first Desktop sight unseen just on the specs, the company's responses to our initial questions, and all the help from the forum.
    Once we had our first machine, there was never a question about the fact that going with the spindle was the right choice for us.....happy enough so that we bought an exact same Desktop within 3 months for the production work
    No regrets at ALL going Shopbot.
    As to the Y limitations...pretty much a non factor, as VCarvePro that comes with the machine has a "Tiling" function, and as long as it's not more than 24" wide, you can slide almost any length project through the Y-axis.
    We only rarely need it, but it's there.
    The Desktop is built like a tank!
    I don't think you'll have any regrets purchasing one, and if you're like me, you'll LOVE the precision and repeatability you'll have!
    scott
    Attached Images Attached Images
    Scott Plaisted
    2013 Desktop/spindle/VCP 9
    Maine

  2. #12
    Join Date
    Jun 2007
    Location
    Hampton Roads, VA
    Posts
    1,096

    Default

    I think the infographic Russ posted tells the tale.
    "Once a person moves away from the computer and CNC some of the most important work begins." ~Joe Crumley

  3. #13
    Join Date
    Nov 2011
    Location
    Earth
    Posts
    196

    Default

    I've had my ShopBot Desktop with spindle since 2011, originally set-up for 120 and then 220 before I left for Australia with it, it cut fine in Canada in a -30C garage (spindle warm-up was literally a must) as well as Perth where it was +40C (spindle warm-up performed, though was debating the purpose). It has traveled the ocean twice, flew in planes and you know what, it still runs just as great NOW as it did 7 years ago though the wiring is losing a bit of color. Everything is still original on it including the spindle but did replace the power supply after running it straight cutting Oak for way too many hours in a hot shop.

    When I got back from Australia, I kept the unit running at 220 and no problems at all, runs as true and straight as ever and I wouldn't hesitate to recommend a ShopBot Desktop to anybody looking to get into CNC machines - I cut my teeth on that machine and use it every few days for "something" to this day.

    Here's a video I made about it years ago when I was in Australia.

    https://www.youtube.com/watch?v=0dKcuvh35m8

    Here's the last video I made with it (more coming soon, just not posted)
    https://www.youtube.com/watch?v=rK_-OXfnxRk

    and here's the first, I wished I aged as well as my Shopbot Desktop!

    https://www.youtube.com/watch?v=DYvhlhAQ9WE

    ShopBot Tools has made lots of advancements since me getting one of the first produced, so whatever you get now will be even better than the perfect little machine I have which is hard to believe.

    Jon
    --------------
    Founder of CNCKing.com (Project files for your ShopBot Table Router) and CNCROi.com (Custom CNC Shop)

  4. #14
    Join Date
    Dec 2008
    Location
    Diamond Lake, WA
    Posts
    1,560

    Default

    Quote Originally Posted by jerry_stanek View Post
    When I first started on the internet it would fit on a 3.5 floppy
    When I started on the internet, it was a data cassette and 300 baud dialup, with REALLY lousy and very limited connection quality. Now it is so common place... When I started in computers, they were programmed with jumper wires.
    Don
    Diamond Lake Custom Woodworks, LLC
    www.dlwoodworks.com
    ***********************************
    Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece; But to skid in broadside, thoroughly used up, worn out, bank accounts empty, credit cards maxed out, defiantly shouting "Geronimo"!

    If you make something idiot proof, all they do is create a better idiot.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •