I've got no idea why the forum decides to trap posts occasionally and require they be validated, but I just went in and approved the ones that were somewhat recent. Hopefully it won't cause too much confusion as old posts pop up.
Bill
I've got no idea why the forum decides to trap posts occasionally and require they be validated, but I just went in and approved the ones that were somewhat recent. Hopefully it won't cause too much confusion as old posts pop up.
Bill
Thanks Bill!!
At least it wasn't me this time
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
Dear Moderators...
Another one from me replying to this thread..
http://www.talkshopbot.com/forum/sho...lute-bit/page2
Sincerely
Martin
Bill,
Can you check on a post I've been trying to make in the virtual show and tell forum? I tried it three times, no post ever appeared. After the first two attempts, I tried writing to the admins of the whole forum asking what was up, but got no reply. I tried the same post in the "practice posting" forum area and it worked. That's when I tried one last time in show and tell. Nothing. This has all been in the last month. Can you help me out?
Simon
My business - Play On Woods
https://www.facebook.com/playonwoods
My youtube channel - Do It
https://www.youtube.com/doitprojects
This is mostly above my paygrade, but see if any/all show up?
My business - Play On Woods
https://www.facebook.com/playonwoods
My youtube channel - Do It
https://www.youtube.com/doitprojects
Okay - using this platform, as I received a first time ever message that the moderators had to approve first, then it would be posted. I see others have successfully posted reply much later than mine, yet it's not showing up. Wonder if this one will....
Jeff
Just had it happen for the first time as well. Had a rather lengthy post and a link to a Google Drive photo and now it's in limbo.
Scott
Makes you wonder, how many people don't even post about it and get so annoyed they don't post for awhile
Shopbot needs to give their IT guy a swift kick....just to get his attention
(NOT you Bill!!!)
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
"Makes you wonder, how many people don't even post about it and get so annoyed they don't post for awhile
Count me in that group...
SG