Results 1 to 4 of 4

Thread: Spindle still spinning long time

  1. #1
    Join Date
    Sep 2015
    Location
    South Carolina
    Posts
    4

    Default Spindle still spinning long time

    I have a 5hp spindle with Yaskawa V1000 and I can not seem to find a way to slow the spindle continuing to spin after a carve or cut to change for another carve or cut. I have changed the deceleration time and it does not seem to work. Can anyone help me with this. It spins for about 2 minutes before it stops. or is this normal...Thanks

  2. #2
    Join Date
    Apr 2007
    Location
    Marquette, MI
    Posts
    3,270

    Default

    Since you are playing in the VFD parameters, you might want to check to make sure that dynamic braking is enabled. Might be parameter name "Stop Method". Ramp to stop is the option I suggest.
    Gary Campbell
    CNC Training & Technology
    GCnC411(at)gmail(dot)com
    Control & ATC Retrofits

    http://www.youtube.com/user/Islaww1


    "We can not solve our problems with the same level of thinking that created them"
    Albert Einstein


  3. #3
    Join Date
    Sep 2015
    Location
    South Carolina
    Posts
    4

    Default

    Thanks Gary, that was it. mine was set to coast to stop. Man your knowledge is vast. If you ever write a book I will certainly
    purchase it.

  4. #4
    Join Date
    Apr 2007
    Location
    Marquette, MI
    Posts
    3,270

    Default

    Mark....
    Send a 7 figure advance, I will take a couple years to write it, we split the take.
    Gary Campbell
    CNC Training & Technology
    GCnC411(at)gmail(dot)com
    Control & ATC Retrofits

    http://www.youtube.com/user/Islaww1


    "We can not solve our problems with the same level of thinking that created them"
    Albert Einstein


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •