I did my first table surfacing on our Buddy today and the surface is not smooth. Does it mean I should square the Z axis ? If yes, how do I do it ? This is my first experience with a CNC ...
Thanks,
AntonioIMG_0979.jpgIMG_0978.jpg
I did my first table surfacing on our Buddy today and the surface is not smooth. Does it mean I should square the Z axis ? If yes, how do I do it ? This is my first experience with a CNC ...
Thanks,
AntonioIMG_0979.jpgIMG_0978.jpg
Make sure the v-rollers on the bottom of the YZ car are snug.
Make sure the machine is perfectly level. Use a 2' framing square to check square between Z & table surface. Don't go off of the spindle or router body.
-B
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com