Results 1 to 2 of 2

Thread: EF error message

  1. #1
    Join Date
    Sep 2013
    Location
    Somerset KY
    Posts
    13

    Default EF error message

    Desktop Max with spindle, get error message EF. I can move the spindle but it will not turn. I have unplugged everything, and restarted the computer, and the EF continues to flash. Any help much appreciated. --Edit 'will not turn on'.
    Ron Woodson
    Desktop Max
    Six inch rotary axis
    Aspire 9
    Kentucky

  2. #2
    Join Date
    Sep 2013
    Location
    Somerset KY
    Posts
    13

    Default

    Update—EF error message is External Fault. It was a disconnected wire inside the VFD, probably from my bumping one of the cables going into the bottom of the VFD. Ben, at Support, identified the problem, and resolved the issue quickly. Pretty darned good tech support for a Sunday afternoon. Thanks, Ben.
    Ron Woodson
    Desktop Max
    Six inch rotary axis
    Aspire 9
    Kentucky

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •