Thanks for the suggestions guys.
I'll try them tonight.
I also have a few suggestions from Support to try.
Here's hoping...
I'll keep you posted.
Scott
Thanks for the suggestions guys.
I'll try them tonight.
I also have a few suggestions from Support to try.
Here's hoping...
I'll keep you posted.
Scott
Hi,
Here's an update.
I won't bore you with the tedious details just the results.
On Monday night I jumpered both E-Stops and ran some air cuts. They both worked so I ran the same file in some Styrofoam. Success!
Encouraged, I made a simple file in PartWorks and ran that. Success again.
So its the E-Stops that have been the root of the problem. I just have to figure out what to do to fix the situation. Support has been very helpful, we just haven't found the fix yet.
I've already done a continuity test on them and last night re-routed the wires for the E-Stops.
That didn't work so the E-Stops are still jumpered.
The troubleshooting continues...