Tim Those are turned on a duplicating lathe, then split on the band saw, then I scoop the spoon bowls out with the cnc. These are for another company that I do work for. I clamp those down with a strip of scrap wood.
The jig I use is held in place with dowel pins. I install the jig every time I need to dip those spoons. I have different jigs that I use for different projects. I do not use tabs on these. I do use taps on other products.





Quote Originally Posted by Tim Lucas View Post
Hi Gene

I would like to see your process in making those. It looks like your prepare your board to a certain thickness, cut the back side, (do you use tabs or ?? ) Then set what looks like 5 or 6 in your jig to complete the front side. (are they held in by the strips on the handles??)

Just curious as when I make my little racks I bring my material down to around 9/16 thick, cut them on the bot then sand the backside down to release the parts.

Thanks
Tim