Results 1 to 3 of 3

Thread: Online Training November 8th 2017 - Flatten a Log Slab

  1. #1
    Join Date
    Sep 2012
    Posts
    281

    Default Online Training November 8th 2017 - Flatten a Log Slab

    Hello everyone,

    Please join ShopBot Tools this Wednesday November 8th, 2017 for a free online training. The topic this week is “Flatten a Log Slab.” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.

    Using a ShopBot and the Vectric software this training will look into the process of flattening a wood slab that was previously cut uneven or rough. This process has been done traditionally using a hand router with a homemade router sled; however, this training shows a much more efficient way of doing this with your ShopBot CNC. During this training we will look into properly holding down the uneven slab, using the right bit, adding ramps to the plunge and flipping the slab over to cut a parallel face. It will be an action packed training and we hope you can join us.

    There is no need to sign up, just show up a few minutes early on Wednesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.

    If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.

    Thanks and hope to see you there. Thanks, TJ

    Flatten a Log Slab
    Wed, Nov 8, 2017 1:00 PM - 3:00 PM EST

    Please join my meeting from your computer, tablet or smartphone.
    https://global.gotomeeting.com/join/959366581

    You can also dial in using your phone.
    United States: +1 (571) 317-3112

    Access Code: 959-366-581

    Joining from a video-conferencing room or system?
    Dial: 67.217.95.2##959366581
    Cisco devices: 959366581@67.217.95.2

    First GoToMeeting? Let's do a quick system check:https://link.gotomeeting.com/system-check

  2. #2
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    Good subject TJ
    Looking forward to it.
    scott
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

  3. #3
    Join Date
    Sep 2012
    Posts
    281

    Default

    Great session today. Thank you for everyone's participation during the live session. Thank you for sharing your projects Scott Plaisted and Mike Warhurst.

    https://youtu.be/SbIzd1Ij_EA

    See you all next time!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •