Results 1 to 2 of 2

Thread: ShopBot Software

  1. #1
    Join Date
    Aug 2011
    Posts
    2

    Default ShopBot Software

    I bought a Buddy in 2011. I've used it for 2D cabinet and fixture building only. Working Fine. I am beginning to make very limited 3D items we learned at SB School in NC. I want to step up my interest and understanding. I believe my SB Alpha came with necessary software? There was a carving pro disk that came with the machine's book at initial school. Do I need to purchase VCarve Pro or Desktop to import Vector clip Art from other than Vectric? I'm really green at this and would like to understand. Thanks

  2. #2
    Join Date
    Mar 2011
    Location
    Marietta, Ga.
    Posts
    324

    Default

    You might want to e-mail Vectric and see about an upgrade to V-Carve Pro V9. It is a reasonable amount of money and is a logical step to Aspire maybe in the future ...joe

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •