Here is is... yet another dust shoe design.

I have a PRS 96x48 and I had the Kent dust shoe which was great, but I added an air drill. As many of you have discovered you can't use the Kent shoe no matter which way you turn it if you add an air drill.

Aside from CNC machining, I do a lot of 3D printing and CAD design so I decided to make my own. The way the PRS is setup it's actually really hard to get a direct air hose near the spindle the way everything is packed in there.

The goals I had for this design is that it have a magnetic removable set of brushes for easy bit changes. I also wanted it to be as high as possible so I can still use clamps, and I also wanted to avoid the crushed hose. Here's the result:

https://youtu.be/B8kaQult6EY

IMG_20171202_132834.jpg