Good morning,

I will be testing and finding out information on the bits to use to drill into the end of an acrylic tube. We may use our cnc for this but is highly unlikely. I wanted to get opinions on if anyone has tried drilling into the ends of an acrylic tube and what bits may work best. I may use drill press or a drill with a jig as a test. In the end if we absolutely need this work done, we will probably just contract it out and have someone do it professionally.

The cleaner the drill/mill the better as we will have to flame polish.

What I'm trying to accomplish is my company want to place an LED strip around the rim, recess the lights so the led board is flat against the acrylic.

Any help is appreciated,