I mentioned this project in a post a long time ago. I got distracted and it sat on the shelf for months until around Thanksgiving when my wife indicated she really wanted to see it done by Christmas. Overall dimension is 44"x27". Basically, table size. The base is 1.5" thick and the entire thing, with prop, weighs about 65 lbs.
This is the finished project:
Stinson108PropMount-prop.jpg
And with the propeller attached:
Stinson108PropMount.jpg
The original drawing, all I had to go on besides pictures on the internet:
108side.jpg
Base, oak with a golden oak stain, oil poly clear:
Base.jpg
Prop mount, 1/4 aluminum with a bezel:
CrankMount.jpg