I have recently acquired a new to me 2013 ShopBot Buddy 32. I bought it from a government liquidation auction and it has never been used. I need some advice on the computer for it, I am thinking of a mini computer by Intel. It is an I5 dual core with 8 gb of ram and a 128 Gb solid state drive. It has a very small footprint (4.5" x 4.4" x 2") and would actually fit inside the Shopbot control box if I decided to go that way. This is primarily a hobby for me at this point as I approach retirement. I have Vectrics V-Carve Pro software and a nice I7 with dual SSD's in Raid 0 for running the design software. Thanks in advance.......Mike in Michigan
Intel NUC.jpg