Z Zero question
Happy New Year all. Have a question. Set up an new laptop computer for my PRT. Downloaded the appropriate Controller software. Setting up zeroing to proximity switches with offset on the X by 7.0 inches and .5 on the Y. All is perfect. Z Zero to the touch plate and it measures .121. Then returns to 1.0 inch per the screen. (see second picture) measured the distance between the tip of the bit to the surface and measures .5. (see first picture).
When I adjust the safe z height to 2.00" and measure, we get a proper measurement of 1.0". What have I done wrong or need to adjust?
Thank you,
Terry
Reply With Quote
