Results 1 to 5 of 5

Thread: Aspire Wrapping Issue

  1. #1
    Join Date
    Mar 2008
    Location
    Columbus, Oh
    Posts
    103

    Default Aspire Wrapping Issue


    Any advice on what I'm doing wrong here would be appreciated. My indexer runs along the x axis on my machine and I do not see any x movement on either of these part files.

    When I wrap it along the y axis, you can see that it still has the y moving instead of the x axis and it is only moving the length of the flattened blank instead of the length of it like when it is wrapped on the x axis.

    Changing which axis was wrapped was the only setting change I made in Aspire on the two part files in the photo...
    Attached Images Attached Images

  2. #2
    Join Date
    Mar 2008
    Location
    Columbus, Oh
    Posts
    103

    Default

    A Rounding Toolpath 5em.sbpRounding Toolpath 3.sbp

    Here are the .sbp files with the wrappings on different axis.

  3. #3
    Join Date
    Sep 2013
    Location
    Somerset KY
    Posts
    13

    Default

    Are you changing post processors?
    There are separate processors for wrapping X along Y, and wrapping Y along X.
    Ron Woodson
    Desktop Max
    Six inch rotary axis
    Aspire 9
    Kentucky

  4. #4
    Join Date
    Sep 2013
    Location
    Somerset KY
    Posts
    13

    Default

    Oops, my bad. I was thinking of the Shark post processors.

  5. #5
    Join Date
    Mar 2008
    Location
    Columbus, Oh
    Posts
    103

    Default

    You were actually spot on. While Aspire does have an indexer post processor for Shopbot, I had to go find the two separate ones inside the Shopbot folders and add them to Aspire. It's now finally cutting away. Thank you for the reply!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •