Results 1 to 3 of 3

Thread: Painting Pvc

  1. #1
    Join Date
    Mar 2012
    Location
    Savannah, Ga
    Posts
    4

    Default Painting Pvc

    Hello Everybody,
    It's been a while since I posted. I have researched the forum for info on painting pvc. I have some 1/2 pvc letters I'm trying to paint that will be mounted on acrylic standoff sign. What is everyone currently using to achieve a flat finish. I did read where Joe said scuff up with 220 grit sandpaper. Some said you can paint with acrylic latex. Trying to paint dark navy blue and metallic gold. Thanks for any help.

  2. #2
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    756

    Default

    This is from the Azek (PVC manufacturer) website. AZEK® Trim products do not require paint for protection, but may be painted to achieve a custom color or to cover nail holes that have been filled. If you choose to paint, use 100% acrylic latex paint with an LRV of 55 or higher.
    I have had very good success with latex Behr from Home Depot.

    Phil

  3. #3
    Join Date
    Jan 2004
    Location
    Norman, Ok
    Posts
    3,101

    Default

    I have found PVC one of the easiest substrates to topcoat. Our favorites paints are acrylic latex.
    It's best to abrade the top surface. I often use a 120p up to 240p on an orbital sander. Three coats are always best.

    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •