Well that will do it...
Press the plate down as it touches off to get a more accurate measurement - AND the plate won't move or kick up because the dust foot pushed down on the angle etc.
-B
Senior Member
Well that will do it...
Press the plate down as it touches off to get a more accurate measurement - AND the plate won't move or kick up because the dust foot pushed down on the angle etc.
-B
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com
Member
The problem is nothing operates on C2 nor does it work with keying the x, y, or z manually
Senior Member
One thing i would do is shut everything down. Then go over to your circuit breaker that your bot is on and shut that down also. Let it sit for a couple minutes then power everything back up. Many times errors get stuck in the memory chip in the bot and this wipes that clean.
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Member
Thanks for everyone's timely response, I thing I will do for sure is to hold onto the zero plate to prevent any movement. Tried everyone's suggestion in one way or another and the problem is resolved by going to utilities
Posting Permissions
Reply With Quote