Originally Posted by
Brady Watson
You'll have to create your component in Aspire and export it as STL. VCP doesn't let you import Aspire's relief format (.3DClip - although I wish it would). Pay close attention to the resolution of the STL.
You should first create your component/relief/texture in Aspire using at least 7x resolution, in an XY space no larger than is required to prevent the voxels from getting 'spread too thin'.
Then when you create the STL, choose a triangle resolution of .0001" - that should be fine enough to pick up the fine detail. The default .001 setting will most likely not be tight enough.
-B