Results 1 to 2 of 2

Thread: VFD settings

  1. #1
    Join Date
    Dec 2011
    Location
    Los Angeles
    Posts
    15

    Default VFD settings

    I recently have had a problem with my spindle during spindle warmup. It made an awful screeching sound before stoping only a minute into warmup. The VFD read an error oL-2 which has several possibilities. I starting scrolling through the settings on the VFD to see if anything could be off, but since the VFD came programed from ShopBot I have no idea what the settings should be if not correct. I have a Yaskawa V1000 VFD and HSD AT/MT1073-070 spindle.

    I also no longer have control of my spindle from the computer or 3 button pendant even though I have the ability to switch between local and remote access on the VFD.

  2. #2
    Join Date
    Sep 2009
    Posts
    31

    Default

    Kenny - What was the answer to fix the awful screeching noise? I have that noise and the only thing i have been doing is inputting parameters with advise from the Yaskawa tech people .
    thanks - Roy Shimp 904 268-3335

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •