I'm needing the top piece. Or both if I have to. $160 Sounds extreme for this. If anyone has an extra laying around they would like to sell get wi th me please 41j-NCgZOkL._SY400_.jpg
I'm needing the top piece. Or both if I have to. $160 Sounds extreme for this. If anyone has an extra laying around they would like to sell get wi th me please 41j-NCgZOkL._SY400_.jpg
If that is a picture of the Kent dust shoe, it is well worth the money!! Tool changing is a breeze with this shoe and dust collection is MUCH better then the Shopbot shoe. I've had one for several years and I think it's one of the best investments I made for my machine.
Don
Diamond Lake Custom Woodworks, LLC
www.dlwoodworks.com
***********************************
Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece; But to skid in broadside, thoroughly used up, worn out, bank accounts empty, credit cards maxed out, defiantly shouting "Geronimo"!
If you make something idiot proof, all they do is create a better idiot.
Yes but I only need to top piece. As j have the piece with the brush.
If it were me I would try to make my own. It would be a good time to get comfortable with VCarve Pro/Aspire. If I was not successful, I would bite the bullet and purchase a new Kent shoe.
Do you need it for the Porter Cable router, or a spindle?
Eric Erickson
Shopbot BT48 Buddy
Porter cable
I broke my top piece, was able to order a replacement for it.
Daniel E.
ShopBot PRS 48x96 (2010 Model)
Porter Cable Router
Vacuum Table w/ 2 Fein vacs
Aspire 9.0
What I do when I don't mess up wood: http://www.pathhome.net