Thanks for the reply Joe.
I glued a 3" vertical strip of .75" PVC to the back of both ends of the sign and lower banner to give me a little more meat to bolt it to the angle iron supports I installed. I used your advice on the Gorilla PVC glue for those strips and for the flat top "roof" parts. Thanks for the advice, worked really well.
I charged $850 for this job. I made a little bit of money but gained a lot of exposure which has led to a couple more small jobs which I hope will lead to more bigger jobs which I will price more in line with what I should be charging.
Please share the sign you're working on. I appreciate all your posts and replies.
2006 PRTalpha 96x48
3hp SEV spindle
Vcarve Pro8
Always eager to consume large amounts of info, tips, and techniques!