Originally Posted by
bryan
I've been noticing on my X axis that going one direction it's very smooth while the opposite direction there is a growing shuttering in the moves.
I've checked all cables to both of the x drives, they appear ok with no broken wires.
Looked at the rails and wheels and so no issues, there.
Tried the moves at 50% of the speed I was cutting at and still was present so I don't think that is an issue.
I'm guessing now that my baby is 15 plus years old that I may finally be having one of the x drives on the Shopbot going bad, tomorrow I'm going to switch the x cables on the box to see if I notice the shuttering moving to the back x drive vs the front x drive.
Does anyone have any suggestions? Maybe time to reach out to Campbell and get that upgrade to prt that I saw a while back, that's all I really need to do now spend more money..