OK, now that I have my machine back and running with the original box I am trying to get the Z-zero routine to work.
Never have been able to get it to work with the old box, but when I put on the 4g box it worked like a charm. Now that I am back to the old box, it is, sort of, half working. When I run the C2 routine, the bit will go down touch the bit, it reads .121 the thickness of the plate. Then the software shows the z moving to the 1" and then coming back down to the plate again (.121) then back up to 1"....but after touching the plate the first time the Z stops moving, despite what the software is showing. This is still better than what I had before, but would sure be nice to get it working correctly.
Any ideas? By the way the 4g box is still for sale.