When I attempt the C5 Command it seems to skip a few lines in the "terminal" or code screen and the spindle does not spin. VFD box lights up, relays click - but no whirrr.

I am new to Shopbot and setting up for a production cabinet shop. I am stressing out, because it wasn't clear how much DIY it was until it got here. Im in it now...

PRS Alpha 96x48 with HSD 2.2 HP 220v Spindle and Pneumatic Assist / Pneumatic Air Drill

The gantry is all setup, and I have gone through all the setup (minus the Air Drill). My goal was to level the spoil board - but im not confident that it will work esp if it won't spin.