Hey all! Thought I'd share cutting files for this:

olivia+desk+and+stool+7.jpg

This is the OpenDesk Olivia Desk. It's an easy to cut, easy to assemble single person desk that takes a 4x4 sheet of 3/4 ply. It's single sided machining.

Over the years I've made a lot of OpenDesk stuff, and recently I've started hacking some of the designs to be a bit easier to make. For this one you can use any 3/4 ply (no need to get the calipers out) Just zero off of your table and run the cutting files that can be found here:

http://www.digitallyfabbed.com/#/olivia-desk/ (scroll to the bottom)

This includes VCarve and Aspire files, and DXF files that are properly organized and layered so it's really easy to create toolpaths in other CAM software if you don't use Vectric stuff. There's even a hardware list so you can make sure you've got the bolts and such that you need to assemble.

2018-05-11 at 11.11 AM.jpg

2018-05-11 at 11.11 AM.jpg

Please note that this is a remix of an OpenDesk design. The licensing is such that this can be remixed and shared, but cannot be used for commercial work unless you pay OpenDesk.

If anyone has any questions let me know. If you build one, share your pictures/experiences.