Results 1 to 3 of 3

Thread: King Color Core

  1. #1
    Join Date
    May 2012
    Location
    St. Paul, Minnesota
    Posts
    53

    Default King Color Core

    Had a chance to finally make some signs with some King Color Core I ordered.
    Lake Sign.jpg

    Cannon Valley Sign.jpg
    I used a 1/4" Amana 2 flute spiral upcut bit @ 120ipm, 15k rpm and an 1/8" Amana spiral upcut bit @ 75ipm, 15k rpm. Stuff cuts real nice!

    Pockets are 0.075"deep.
    Nate Sirek

    Operations Manager;
    Shop Fabrication Manager
    House Partners Inc.
    West Saint Paul, MN


    Shopbot 48 x 96 PRT Alpha
    220v 18000 RPM HSD Spindle
    4 Zone Vacuum Table, 7hp Spencer Re-Gen Blower
    Cabinet Parts Pro

    10 Years Experience in a cabinet and counter top fabrication shop. CNC Newbie.

  2. #2
    Join Date
    Sep 2006
    Location
    Garland Tx
    Posts
    2,334

    Default

    Good idea Nate! I hadn’t thought about hanging the bot from the ceiling! That would give me some much needed room!
    Oh, and nice looking signs!

    SG

  3. #3
    Join Date
    May 2012
    Location
    St. Paul, Minnesota
    Posts
    53

    Default

    Steve,

    Just noticed my uploaded pic is upside down lol. I handle computers so well!
    Nate Sirek

    Operations Manager;
    Shop Fabrication Manager
    House Partners Inc.
    West Saint Paul, MN


    Shopbot 48 x 96 PRT Alpha
    220v 18000 RPM HSD Spindle
    4 Zone Vacuum Table, 7hp Spencer Re-Gen Blower
    Cabinet Parts Pro

    10 Years Experience in a cabinet and counter top fabrication shop. CNC Newbie.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •