Results 1 to 5 of 5

Thread: Direction needed | problem with vcarve path

  1. #1
    Join Date
    Jun 2018
    Posts
    3

    Default Direction needed | problem with vcarve path

    Does anybody have any idea why this toolpath is behaving in such a way? never before have I had this problem. any advise is appreciated.

    Aspire 8
    PRS-Standard 4x8
    MDF - .375"
    60degree vcarve bit .5" Diameter
    6inches/second feed
    .2" cut depth

    ,Doppie
    Attached Images Attached Images

  2. #2
    Join Date
    Oct 2009
    Location
    Elgin Illinois
    Posts
    706

    Default

    Hello Doppie…. Can you post a bigger picture? It is so tiny, it is hard to see. Thanks, Chuck
    Chuck Keysor (circa 1956)
    PRT Alpha 60" x 144" (circa 2004)
    Columbo 5HP spindle
    Aspire 9.0, Rhino 5

  3. #3
    Join Date
    Sep 2008
    Location
    San Jose del Cabo based since 1997
    Posts
    1,244

    Default

    overlapping vectors check for loops and open vectors
    Vector Studio 22

  4. #4
    Join Date
    Jun 2018
    Posts
    3

    Default

    Quote Originally Posted by Chuck Keysor View Post
    Hello Doppie…. Can you post a bigger picture? It is so tiny, it is hard to see. Thanks, Chuck
    Capture3.jpgCapture4.jpg

  5. #5
    Join Date
    Jun 2018
    Posts
    3

    Default

    "overlapping vectors check for loops and open vectors" - gc3

    that did the trick! This cursive font overlaps on each letter connection. not sure why the path went awry on just that portion of the text. anyways, Thank you for your helpful input.

    ,Daniel O
    Last edited by DOppie; 06-08-2018 at 03:27 PM. Reason: referenced above post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •