I've been away from the company where i use artcam 8 for a couple years now so i need some refresher info. I need to make a reverse image just like a litho for a bronze casting.
My issue is, no matter how low or high i scan the photo at when i get it into the program it looks like crinkled up tinfoil or 80 grit sandpaper. The more smoothing i use the more detail i lose. Are there any tips or tricks to help this? Also the detail in the dark jacket tends to just get lost. Notice all the speckles in the dark jacket part...
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Lithophane modeling issues
Reply With Quote
