Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Remote vacuum a good idea?

  1. #11
    Join Date
    May 2010
    Location
    Squamish, B.C.
    Posts
    135

    Default

    Thanks fellas' I appreciate the feedback!

  2. #12
    Join Date
    Dec 2005
    Location
    Pro Signs, Coal CIty IL
    Posts
    227

    Default

    I don't have any experience with a vac hold down for the CNC, I screw my material down to the sacrifice board. However back when I did screen printing a made a vac platten to hold sheets of vinyl flat for printing. I put the shop vac in the crawl space and ran the hose through the wall to the screen press. It was just loud enough to remind me it was on & worked well. Had a remote on/off switch mounted to the side of the screen press with an indicator light, as backup in case I forgot about the dull hum of the shop vac in the crawl space.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •