I have been wanting to learn Fusion 360 for a while and decided that making a dust collector pickup would be a fun way to do both. My BT48 came with the stock pickup [I was not impressed] and had built a custom pickup for my PRS 48x48 that had the hose behind the gantry which I really liked, but that would not work on the Buddy. I tried the pickup style with magnetic rings and the hose in front of the spindle [I forget the gents name- Kent?] and did not like it on my machine for what I do. So this is my design to transition from an overhead 4" hose, around the spindle and into a single pickup which is attached magnetically to the baseplate. I had a huge amount of fun... and it works well- better yet. Some parts were cut on the laser, some printed. The baseplate [actually the whole assembly] moves up and down about an inch. Gene
Shopbot BT48 DC+.jpg