Results 1 to 2 of 2

Thread: Online Training Tuesday July 17th - One Board Project: Sports Platters

  1. #1
    Join Date
    Sep 2012
    Posts
    281

    Default Online Training Tuesday July 17th - One Board Project: Sports Platters

    ServingTrayField2.jpgServingTrayHelmet2.jpg

    Hello everyone,

    Please join ShopBot Tools this Tuesday July 17th, 2018 for a free online training. The topic this week is a "One Board Project: Sports Platters". The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.

    Using a ShopBot and the Vectric software this training will work through the creation of different sports themed platters from one board. We will look into the design, toolpathing and cutting techniques during this training. It will be an action packed training and we hope you can join us.

    There is no need to sign up, just show up a few minutes early on Tuesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
    If you have any other questions please feel free to shoot me an Email.

    This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.

    Thanks and hope to see you there. Thanks, TJ

    One Board Project: Sports Platters
    Tue, Jul 17, 2018 1:00 PM - 3:00 PM EDT

    Please join my meeting from your computer, tablet or smartphone.
    https://global.gotomeeting.com/join/919245181

    You can also dial in using your phone.
    United States: +1 (224) 501-3412

    Access Code: 919-245-181

    Joining from a video-conferencing room or system?
    Dial: 67.217.95.2##919245181
    Cisco devices: 919245181@67.217.95.2

    First GoToMeeting? Let's do a quick system check:https://link.gotomeeting.com/system-check

  2. #2
    Join Date
    Sep 2012
    Posts
    281

    Default

    We had another great turnout this past Tuesday. My regular computer is with the "Geek Squad" right now trying to recover! I think it may have seen its last training. Until I can recover the video from it I am attaching the files below. Make sure you keep your calendars open July 31st for Two Sided Machining. We will look at how to setup a file, flip your material and carve from both faces of your material!

    SportsPlatters.zip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •