Results 1 to 5 of 5

Thread: Online Training Tuesday July 31st - Two Sided 3D Machining

  1. #1
    Join Date
    Sep 2012
    Posts
    281

    Default Online Training Tuesday July 31st - Two Sided 3D Machining

    IMG_1232.jpgIMG_1234.jpg

    Hello everyone,

    Please join ShopBot Tools this Tuesday July 31st, 2018 for a free online training. The topic this week is “Two Sided 3D Machining” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.

    Using a ShopBot and the Vectric software this training will work through the setup and machining of a 3D model. This model will need to be machined from two sides so we will look at techniques for layout in the design software as well as alignment options on the ShopBot for flipping the board over. We will also talk about zero plane positioning, overcutting, tabs and dowels for hold down.

    There is no need to sign up, just show up a few minutes early on Tuesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.

    If you have any other questions please feel free to shoot me an Email.

    This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.

    Thanks and hope to see you there. Thanks, TJ

    Two Sided 3D Machining
    Tue, Jul 31, 2018 1:00 PM - 3:00 PM EDT

    Please join my meeting from your computer, tablet or smartphone.
    https://global.gotomeeting.com/join/784697413

    You can also dial in using your phone.
    United States: +1 (571) 317-3112

    Access Code: 784-697-413

    Joining from a video-conferencing room or system?
    Dial: 67.217.95.2##784697413
    Cisco devices: 784697413@67.217.95.2

    First GoToMeeting? Let's do a quick system check:https://link.gotomeeting.com/system-check
    Last edited by TJ; 07-29-2018 at 08:27 PM. Reason: sp

  2. #2
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    Sounds good TJ
    Certainly VCP9 2 sided made a set of kids blocks a little easier to visualize(I'd forgotten I had to flip the second side font 180*).
    STILL haven't done a 2 sided 3D yet.
    See Ya
    scott
    Attached Images Attached Images
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

  3. #3
    Join Date
    Apr 2013
    Location
    Kennebunkport, Maine
    Posts
    4,419

    Default

    TJ,
    3d Tabs under clipart
    Attached Images Attached Images
    scott P.
    2013 Desktop/spindle/VCP 11.5**
    Maine

  4. #4
    Join Date
    Sep 2012
    Posts
    281

    Default

    Thank you everyone today who was able to attend today live, we had a great turnout and a great discussion. Here is the YouTube link for viewing: https://youtu.be/4sj-4Acdbbk

    The files are to big to attach to the forum so tomorrow I will get them added to the ShopBot DropBox folder and post a link here for downloading the files.

    Enjoy!

  5. #5
    Join Date
    Sep 2012
    Posts
    281

    Default

    Here is the link to download the files: https://www.dropbox.com/s/5frof5gtsi...rop3D.zip?dl=0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •