Hello everyone,

Note that the training day of the week has moved to Thursday’s.

Please join ShopBot Tools this Thursday August 23rd, 2018 for a free online training. The topic this week is “Temporary Zeros.” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.

Typically we use the bottom left corner to zero our X and Y axis, it is easy to do with our proximity switches. However, there are times where zeroing is beneficial in the middle of the material. There are also times where one may choose to use a jig, fence or other portion of their table. For this training we will look at setting up offsets and temporary zeros for positioning outside the default bottom left hand corner of your ShopBot CNC machine.

There is no need to sign up, just show up a few minutes early on Thursday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.

If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.

Thanks and we hope to see you there. Thanks, TJ

Temporary Zeros
Thu, Aug 23, 2018 1:00 PM - 3:00 PM EDT

Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/664196605

You can also dial in using your phone.
United States: +1 (872) 240-3311

Access Code: 664-196-605

Joining from a video-conferencing room or system?
Dial: 67.217.95.2##664196605
Cisco devices: 664196605@67.217.95.2

First GoToMeeting? Let's do a quick system check:https://link.gotomeeting.com/system-check