Results 1 to 3 of 3

Thread: File Running is in Metric mode?

  1. #1
    Join Date
    Apr 2018
    Posts
    2

    Default File Running is in Metric mode?

    I set up a grid pattern in VCarve Pro. When I go to cut the file in shopbot, a box pops up and says "The file you are running is written for use in metric mode. Currently your software is set up for inches." I've double checked my material set up, bits, etc in VCarve and everything shows as inches. Am i missing something? Thanks

  2. #2
    Join Date
    Apr 2007
    Location
    Marquette, MI
    Posts
    3,363

    Default

    Using a metric post processor to save the file?
    Gary Campbell
    CNC Training & Technology
    GCnC411(at)gmail(dot)com
    The Ultimate Woodworking Machine
    http://www.youtube.com/user/Islaww1


    "We can not solve our problems with the same level of thinking that created them"
    Albert Einstein


  3. #3
    Join Date
    Apr 2018
    Posts
    2

    Default

    That was it. When I saved my toolpath, I did not realize that there was the .sbh for inches and mm. I would just see the .sbh pop up and just clicked save..... thanks for reaching out!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •