Maybe this has been asked before but, can the spindle speeds be controlled with the software (Aspire) on an Desktop Max?
Maybe this has been asked before but, can the spindle speeds be controlled with the software (Aspire) on an Desktop Max?
Yes, you set the speed for each toolpath in Aspire and that is sent to the CNC.
Don
Diamond Lake Custom Woodworks, LLC
www.dlwoodworks.com
***********************************
Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece; But to skid in broadside, thoroughly used up, worn out, bank accounts empty, credit cards maxed out, defiantly shouting "Geronimo"!
If you make something idiot proof, all they do is create a better idiot.
I don't believe the 110v spindles can be controlled via software
Gary Campbell
GCnC Control
GCnC411(at)gmail(dot)com
Servo Controller Upgrades
http://www.youtube.com/user/Islaww1
"We can not solve our problems with the same level of thinking that created them"
— Albert Einstein
Thinking real hard about buying a Desktop Max so I'm just trying to gather as much info as possible before making the big leap. Maybe I should ask Shopbot tech support.
Good idea to talk to Tech or Sales Steve.
A friend with one of the first Max's had to manually adjust with the VFD like I do with my regular Desktop.
They MAY have changed since then?
scott
scott P.
2013 Desktop/spindle/VCP 11.5**
Maine
I contacted tech support via email and this was their response.
Original Question:
Can the spindle speeds be controlled with the software (Aspire) on an Desktop Max?
Response:
"No, the spindle speeds on all Desktop models are controlled by a dial on the VFD."
Last edited by SteveNelson46; 10-01-2018 at 12:28 PM.