-
Convert tool path to vector
I have a v carve tool path that I need to convert to a vector. Can the Shopbot version of V Carve Pro export that as a dxf? I don't have that post processor available.
Thanks in advance.
-
If I’m understanding your question correctly…
The ShopBot control software, SB3 can convert .sbp toolpaths to DXF files.
XXX.sbp files can be exported under (f)ile--> file(C)onversions. There are some issues however… the resulting vectors are the centerline of the bit and must be offset ½ the bit diameter in or out depending on what was pathed. The bigger issue is that stepdowns are exported as vectors spiraled on top of each other ands can be a bugger to sus out!
SG
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules