Results 1 to 6 of 6

Thread: File Naming Strategy

  1. #1
    Join Date
    Nov 2016
    Location
    New Mexico
    Posts
    43

    Default File Naming Strategy

    Just wondering what kind of File Naming Strategies are used by others.

    In our case, we use this:
    bit-subject-time

    60- A 60 degree V blade
    Subject - An identifier of the work piece
    Time- Amount of time to cut the piece

    So... A file name for a John Wayne sign cutting with a 60 degree V bit and taking 45 minutes to cut would be:

    60-JohnWayne-45.sbp
    Dave B
    New Mexico
    Our most important shop tool is the pencil sharpener!

  2. #2
    Join Date
    Aug 2013
    Location
    Clayton, NC
    Posts
    424

    Default

    I start with the project identifier name, and then a version number.

    Like "NC Coffee Table V1"
    "NC Coffee Table V2" and so forth.
    Daniel E.
    ShopBot PRS 48x96 (2010 Model)
    Porter Cable Router
    Vacuum Table w/ 2 Fein vacs
    Aspire 9.0

    What I do when I don't mess up wood: http://www.pathhome.net

  3. #3
    Join Date
    Mar 2016
    Location
    Brooklet, Ga
    Posts
    185

    Default

    For my drawing files I'll do something simple like "Elephant bookshelf".
    For the toolpath files, I'll do something like this:
    Elephantbookshelf.50ply48x96Pocketandprofile.25com pmortTableZero

    This tells me:
    1- what I'm cutting
    2- what material I'm using, how thick the material is, and what the size of the material is that I need
    3- what toolpath it is cutting
    4- what bit I need to use
    5- where to zero the Z.

    If I need to use multiple toolpaths and different bits on the same job, I edit #3 and 4 when saving toolpaths in Vcarve Pro to let me know what I need to do next on the same sheet.
    Labeling the files this way lets me know what I need to know if I need to do a job I've done before if I'm away from my design computer.
    2006 PRTalpha 96x48
    3hp SEV spindle
    Vcarve Pro8
    Always eager to consume large amounts of info, tips, and techniques!

  4. #4
    Join Date
    Nov 2016
    Location
    New Mexico
    Posts
    43

    Default

    Wow. That makes sense. Will rethink my strategy for file names.
    Dave B
    New Mexico
    Our most important shop tool is the pencil sharpener!

  5. #5
    Join Date
    Feb 2004
    Location
    Rogers, Arkansas
    Posts
    998

    Default

    For toolpaths I use:

    A_jobname_60hsv_Zll_Top

    A is order toolpaths are to be cut in (A,B,C etc)
    Jobname is a job id
    60hsv is the bit to be used (60 Hersaf V, 1_4em for 1/4 End Mill etc)
    Zll is z lower left (Zcent would be z center of material)
    Top or Bot for top of material
    Ken Zey
    Lookout Mercantile / Digital Millwork
    Rogers, AR
    www.CedarSlabSigns.com
    www.lookoutmercantile.com
    www.digitalmillwork.com

    6x12 PRS alpha

  6. #6
    Join Date
    Jun 2004
    Location
    Springfield Mo
    Posts
    800

    Default tool paths

    I like the zeykr system ... with a tool path note for material size and three numbers for the cutting depth

    sp is a spiral toolpath... tb means tabs are added to the final cut

    hp is home position

    files are cut in the order shown A to V
    Attached Images Attached Images
    The decimal point seems to be the most important on the z axis... x & y not so much....
    ShopBot... Where even the scraps and things you mess up and throw away are cool....

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •