Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Very Cheesy. And plastic lattice is PVC with a pretty low melt point.
I have some pvc water lines fairly close and they actually don't even get warm. I would have made it tall enough so that would not have been a factor, but your opinion on the cheesy factor only confirms my thoughts too. If you can think of some other material that might work, please let me know. If i had access to my shopbot i could get some 1/4" corian and cut it...
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Check out this link and go with your favorite!
https://www.amazon.com/radiator-grat...diator%20grate
Cheaper/Easier to just buy them and be done with it.
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com
Brady Have you ever known Jack to do something the easy way
My post got edited by a ghost!
Deleted: Not cheesy = not cheap
Here is the problem. I need about 200 feet of this stuff. So Brady, and Dave and "begrudgingly" Mark are all right. HOWEVER, in my defense i'll say...this is why we have shopbots and are creative because we figure we can make something better, faster, cheaper. Sometimes after lots of questions, research, trial and error you find out that when someone says "Cheaper/Easier to just buy them" he's probably right......(grrrr!)
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
So I stopped into the paint store and asked about a gallon. Got a price. Asked about 5 gallons. Got a SLIGHTLY lower price per gallon.
10'----200'. They both equal design time plus materials plus overhead plus profit. Not all that much cheaper per section after the first few.