Has anyone made any radiator covers for anything like this? If so what material did you use? What it is, is copper tubing with fins on it for radiant heat.
What was over it previously was metal covers that wold take me a year to refurbish taking paint off of and they look like ****. To replace them is way too expensive at about $100 for a 4 ft section and i have hundreds of feet needed. Any suggestions about metal replacements at a reasonable cost, or what material to make something to cover it with would be appreciated.
Words of Wisdom:
“Words that sink into your ears are whispered…… not yelled”
“The biggest trouble maker you’ll probably ever have to deal with, watches you from the mirror every morn’n”
“The only difference between a rut and a grave is the depth”
-----------
Just remember...when it's time for the hearse to pull up..there's no luggage rack on top!
-----------
The beauty of the Second Amendment is that it will not be needed until they try to take it...Thomas Jefferson
Radiator covers??
Reply With Quote
