Thanks Eric
I'd better find the same sensor but normally closed.
Writing from Europe and local stores are my preferred choice.
Regards
Thanks Eric
I'd better find the same sensor but normally closed.
Writing from Europe and local stores are my preferred choice.
Regards
Buy a pair of matching switches. Doesn't matter if they are NO or NC, as long as they match. Any that can take 24vdc should be fine (and most do - esp. in Europe). I think the ones on your machine were black/rectangular - about 4x8x25mm or so. You're going to find that the most commonly available ones these days are threaded barrel mount, which is fine, but you'll have to make an adapter mount to put them on, which isn't a big deal.
High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com
Hallo again.
I installed NC proximity switces. To work both I put one on input 3, and аnother on input 5.
Seems they work properly. The original proximity switches, however, were NO so now I have to edit my "XYzero.sbp" file to respond to NC switches on #3 and #5 inputs.
Can anybody help?
Regards
Kamen