Results 1 to 2 of 2

Thread: I want no step over

  1. #1
    Join Date
    Apr 2007
    Location
    Bancroft Ont Canada
    Posts
    5

    Default I want no step over

    How do I make multiple passes without a stepover. I want to cut 12 circles with 7 passes each with no stepover.

  2. #2
    Join Date
    Jan 2004
    Location
    iBILD Solutions - Southern NJ
    Posts
    7,860

    Default

    The tool should not step over during a profile pass, UNLESS you have activated the 'Do separate last pass' option OR added allowance.

    In another thread you said:
    Quote Originally Posted by dldalley View Post
    I am trying to make a cut with multiple passes WITHOUT a step over. After reading the prior question, the program should ignore the stepover however it does not. It is stepping over to the outside when I am trying to cut the inside. What am I doing wrong?
    Make sure that first, you are working with a closed vector. Second, make sure that you have chosen an OUTSIDE profile strategy rather than an inside, or 'on'. Also verify that Allowance is set to 0 and that you are not doing a lead in/lead out down in the toolpath options tabs in the profile toolpath fill-in sheet.
    High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training IBILD.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •